System installation
Installation for table top use
1. Place the stand under the
main unit.
Wall mounting installation
1. Sign the dots for the screws on the wall with a pencil.
2. Drill the holes there to attach the unit to the wall.
3. Twist the screws in the holes (screws included).
Hang the unit up.
4.
2. Slide the stand upward.
Screw positions
- 7 -
3 Stop when the indicator mark on the
stand is aligned with the lock
symbol on the rear panel. The stand
is now locked to main unit.
To release the stand from
the main unit, slide the
stand downwards (opposite
direction) until it becomes released.