Table of Contents
Advertisement
4. Appendix
4.1. Reset Procedure
Reset to Factory Default Setting
The Control Panel can clear all programmed
parameters by the following sequence:
1. Power down Control Panel and remove the
battery
2. Apply power while holding down the
3. Release the
Enter Code will be displayed.
4. Enter
the
following
5. Press the
key
6. All programmed parameters are reset to
factory default setting.
7. If more than 17 incorrect keys entered,
then the unit will revert to normal Alarm On
mode.
<
N
O
T
E
>
<
N
O
T
E
>
Once the System Reset is executed,
all the programmed data are returned
to its default value and all the devices
having been learnt-in are removed.
You have to do the programming and
learn in the device one by one again.
key when a tone is heard,
keys
sequence:
, OK key
key.
43
Hide quick links:
Advertisement
Table of Contents
