Memory Tune Operation - Yaesu FT-991 Operating Manual

M o
eMorY

Memory Tune Operation

The frequency may be freely tuned off from any memory channel in "Memory Tune" mode; this is similar to VFO op-
eration. So long as you do not over-write the contents of the current memory, Memory Tune operation will not alter the
contents of the memory channel.
1. Press the V/M button to recall any memory channel.
2. Press the F(M-LIST) button, then touch [ MCH ] on
the LCD.
3. Rotate the MULTI knob to select the memory chan-
nel.
4. Rotate the Main Tuning Dial knob; you will now ob-
serve that the memory channel frequency is chang-
ing.
A :
dvice
 During Memory Tune operation, you may change
operating modes, and engage the offset Clarifier,
if desired.
5. Press the V/M button momentarily to return to the
originally memorized frequency of the current mem-
ory channel. One more press of the V/M button will
return to VFO operation.
Page 102
peration
S M
tAndArd eMory
o
perAtion
F(M-LIST ) Button
MULTI Knob
n :
ote
Computer software programs utilizing the CAT system
interface port may presume that the transceiver is oper-
ating in the VFO mode, for certain features like "band
mapping" and/or frequency logging, because the "Mem-
ory Tune" mode so closely resembles the VFO mode.
Be sure that you have the FT-991 operating in a control
mode compatible with the software's requirements. Use
the VFO mode if you're not sure.
FT-991 O
V/M Button
M
peraTing anual