Positioning Belts - Pride Quantum 6000Z 3S Owner's Manual

WARNING! Always be sure your power chair and its batteries are properly secured when it is
being transported. Batteries should be secured in an upright position and protective caps should
be installed on the battery terminals. Batteries should not be transported with any flammable or
combustible items.

Positioning Belts

Your Quantum Rehab Provider, therapist(s), and other healthcare professionals are responsible for
determining your requirement for a positioning belt in order to operate your power chair safely. The
positioning belt is not designed for use as a restraining device in a motor vehicle. You should be properly
belted into seats approved by the vehicle manufacturer with your power chair properly stowed for vehicle
transport or secured using an optional transit securement system.
Positioning belts should be installed as detailed in this manual. See V. "Comfort Adjustments." Once
installed, the belt should be placed across the pelvis as determined by your healthcare provider. Anchor points
of the positioning belts should be located so that a projected side-view angle of the pelvis is between 45°-75°
of horizontal depending on the user's weight, posture, and seat cushion thickness.
WARNING! If you require a positioning belt to safely operate your power chair, make sure it is
fastened securely in order to reduce the possibility of a fall from the power chair.
WARNING! The positioning belt is not designed for use as a seat belt in a motor vehicle. Nor is
your power chair suitable for use as a seat in any vehicle. Anyone traveling in a vehicle should
be properly belted into seats approved by the vehicle manufacturer. If your power chair is
equipped with a manufacturer-installed transit securement system, please refer to the
supplemental safety information provided with your power chair.
Batteries
In addition to following the warnings below, be sure to comply with all other battery handling information. For
more information about your power chair's batteries, see VI. "Batteries and Charging."
MANDATORY! Battery posts, terminals, and related accessories contain lead and lead
compounds. Wear goggles and gloves when handling batteries and wash hands after
handling.
WARNING! Power chair batteries are heavy. See specifications table. If you are unable
to lift that much weight, be sure to get help. Use proper lifting techniques and avoid
lifting beyond your capacity.
WARNING! Always protect the batteries from freezing and never charge a frozen
battery. Charging a frozen battery may result in damage to the battery.
WARNING! Connect your battery harnesses in the proper manner. RED (+) cables must
be connected to positive (+) battery terminals/posts. BLACK (-) cables must be
connected to negative (-) battery terminals/posts. Protective caps should be installed
over all battery terminals. REPLACE cables immediately if damaged.
Removable Parts
WARNING! Do not attempt to lift or move a power chair by any of its removable parts, including
the armrests, seat, front riggings, controller, and shrouds.
Preventing Unintended Movement
WARNING! If you anticipate being seated in a stationary position for an extended period of time,
turn off the power. This will prevent unexpected motion from inadvertent joystick contact. This
will also eliminate the possibility of unintended chair movement from electromagnetic (EM)
sources.
14
I I . S A F E T Y
www.pridemobility.com Quantum 6000Z Series