Wideye Seagull 5000i User Manual page 54

Each point of the fencing area is defined using latitude and longitude GPS coordinates.
Number of point for setting up the fencing area varies depending on the selected fencing
type. Table below summarizes number of points required for each fencing type:
Note:
When authentication is enabled, this sub menu is tracking password protected and
no change of setting is allowed unless the correct password is entered.
External Buzzer
Select this to enable or disable the external buzzer.
Fax
Select this to view or change settings related to fax. The following settings are available in
this sub menu:
• Num. Of Retries
Select this to set the number of retries when the UE failed to send/print the fax.
The following settings are available in this sub menu:
Send
Select this to set the number of retries for outgoing fax. Set to zero indicates
that there will be no attempt to resend the fax when the UE failed to send the
fax.
Note:
Airtime charge may apply for each retry attempt.
Print
Select this to set the number of retries for fax printing once the UE has received
an incoming fax. Set to zero indicates that there will be no attempt to reprint
the fax when the UE failed to print the received fax to the connected fax
machine.
52