1. Manuals
  2. Brands
  3. Pro-Ject Audio Systems Manuals
  4. Turntable
  5. RPM 1 Carbon
  6. Instructions for use manual

Pro-Ject Audio Systems RPM 1 Carbon Instructions For Use Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTIONS FOR USE
Pro-Ject RPM 1 Carbon

Advertisement

Table of Contents
loading

Related Manuals for Pro-Ject Audio Systems RPM 1 Carbon

Summary of Contents for Pro-Ject Audio Systems RPM 1 Carbon

  • Page 1 INSTRUCTIONS FOR USE Pro-Ject RPM 1 Carbon...
  • Page 2 © Pro-Ject Audio Systems · Pro-Ject RPM 1 Carbon / Ortofon 2M Red · Revision 2014.10.8...

  • Page 3: Controls, Features And Connections

    Connection cable (not shown)* Power supply (not shown) * Stylus pressure gauge - white plastic instrument with mN scale (not shown) * Hexagonal key (not shown) * © Pro-Ject Audio Systems · Pro-Ject RPM 1 Carbon / Ortofon 2M Red · Revision 2014.10.8...

  • Page 4: Cartridge Downforce Adjustment

    Finally secure the counterweight (4) using hexagonal key provided. Please note: It is advised to remove stylus tip from gauge whilst making adjustments to avoid damage to stylus. © Pro-Ject Audio Systems · Pro-Ject RPM 1 Carbon / Ortofon 2M Red · Revision 2014.10.8...

  • Page 5: Adjusting The Vertical Tracking Angle (Vta)

    Three examples of magnetic anti-skating mechanism: a) Downforce – 1,5g; Anti-skating force 1,5g b) Downforce – 1,7g; Anti-skating force 1,7g c) Downforce – 2,3g; Anti-skating force 2,3g © Pro-Ject Audio Systems · Pro-Ject RPM 1 Carbon / Ortofon 2M Red · Revision 2014.10.8...

  • Page 6: Connection To The Amplifier

    If the player is not used over a long period of time the drive belt can be removed to prevent unequal stretching. Always disconnect the record player from the mains power supply as a precaution before maintenance! © Pro-Ject Audio Systems · Pro-Ject RPM 1 Carbon / Ortofon 2M Red · Revision 2014.10.8...

  • Page 7: Fitting And Connecting The Cartridge

    Channel separation 22dB/1kHz Output voltage 5,5mV Recommended load impedance 47kohms/ amplifier connection – MM-input Compliance/stylus type 20µm/mN – elliptical Recommended tracking force 18mN Weight 7,2g © Pro-Ject Audio Systems · Pro-Ject RPM 1 Carbon / Ortofon 2M Red · Revision 2014.10.8...

  • Page 8: Warranty

    This guide was produced by: Pro-Ject Audio Systems notice as deemed necessary to uphold the ongoing Copyright © 2014. All rights reserved. process of technical development. © Pro-Ject Audio Systems · Pro-Ject RPM 1 Carbon / Ortofon 2M Red · Revision 2014.10.8...
  • Page 9 © Pro-Ject Audio Systems · Pro-Ject RPM 1 Carbon / Ortofon 2M Red · Revision 2014.10.8...

Table of Contents