Wheel Removal - Honda CBF250 Owner's Manual

03/10/23 11:15:05 32KPF600_082

WHEEL REMOVAL

(Refer to the maintenance precautions on
page 57 ).
This motorcycle is equipped with a side
stand only. Therefore, if front or rear
wheel removal is required, it will be
necessary to raise the center of the
motorcycle with a jack or other firm
support. If none is available, see your
Honda dealer for this service.
76
Front Wheel Removal
1. Raise the front wheel off the ground by
placing a support block under the engine.
2. Disconnect the speedometer cable (1) by
removing the speedometer cable set
screw (2).
(2)
(1) Speedometer cable
(2) Speedometer cable set screw
(1)