Table of Contents
Advertisement
RedPlate RPHD100 Operations Guide
The Overdrive section is used to add character to the clean tone. The section's range of effect can be just a hint of early break up or a
more aggressive distortion.
Drive Control – Sets the amount of distortion by controlling the level between the 2 gain stages of the section.
Level Control – Sets the output volume of the section. Higher settings are "bigger" and more 3 dimensional.
Master Volume – This control sets the overall volume of the amplifier.
Presence Control – The presence circuit uses global negative feedback to remove low frequencies which frees up bandwidth for more
midrange and highs. Think of it as a tone control to balance the relationship between highs and lows, especially when the amplifier is
naturally producing increased low end at louder volumes.
OVERDRIVE SECTION
DRIVE LEVEL
MASTER SECTION
MASTER PRESENCE
3
Advertisement
Table of Contents
