RedPlate Overdrive Classic RPHD100 Operation Manual page 2

RedPlate RPHD100 Operations Guide
FRONT PANEL:
Input Jacks – NORMAL = Typical High impedance input to the amplifier. FET = Input is buffered by a FET stage.
CLEAN PREAMP SECTION
Volume Treble Middle Bass
Bright Mid Rock/Jazz
Volume – Preamp volume control typical setting is between 4 and 6 but experimentation is encouraged.
Bright Switch – Up = Increase in the higher treble frequencies.
M i d S w i t c h – Up = Increase in the upper midrange frequencies.
Rock/Jazz Switch – Up = Normal, Down = less lower midrange frequencies.
Treble Control - Adjusts high frequencies (also upper midrange when the Mid switch is engaged).
Middle Control – Controls the amount of Midrange frequencies, somewhat interactive with the Bass Control.
Bass Control – Sets the amount of low end.
2