Table of Contents
Advertisement
C-NaviGator III User Manual
Cables
Use only high quality shielded signal cables.
Cable Entries & Connectors (Marked area) - Illustration only
Maximum Cable Length
Any cable should generally be kept as short as possible to provide a high quality
input / output. The maximum signal cable length will depend on the signal
resolution and frequency.
Configuring Housing Connectors
Housing connectors are available in different sizes (2-pin, 4-pin or 5-pin) which
plugs into the connector area of the unit. These housing connectors are by
factory default mounted on the unit. Below is a brief illustration that might be
useful during configuration and installation of such connectors. You will need
suitable pre-configured cable(s) and tools to configure the connector(s) and
cable(s) that are present in your installation environment. Below is a sample for a
2-pin DC power connector. The procedure is the same for other connectors of
this type.
Revision 2
Page 67 of 121
9/27/2013
Advertisement
Table of Contents
