Setting The Date And Time - Utax CD 1116 Instruction Handbook Manual

Preparation

Setting the Date and Time

2-16
Use these instructions to register the current date and time, the time
difference from Greenwich Mean Time (GMT), and the summer time
setting.
1
Press [System Menu / Counter].
2
Press or to select Machine
default and press [Enter].
3
Use the keypad to enter the 4 digit
management code.
NOTE:
The factory default management code varies for each model:
16 ppm model = 1600, 20 ppm model = 2000, and 25 ppm model = 2500.
The four-digit management code can be changed. For details refer to
Chapter 3, Advanced Operation Guide.
If the code is accepted, the
Machine default screen displays.
4
Press or to select Date/Time
and press [Enter].
5
Press or to select Time
Zone.
Press < or > key to set the time
difference from Greenwich Mean
Time.
System Menu / Counter:
Job Accounting
Copy Default
Machine Default
Enter Pin Code using # key.
Machine Default:
End
Auto Cassette SW
Paper Size(1st)
Machine Default:
Low Power Time
Key Sound On/Off
Date/Time
Date/Time:
Time : 06:33
DST : Off
Time Zone : GMT
BASIC OPERATION GUIDE
:
On
: Auto I
: 15Min.
: On
: 06:33
+ 00:00