Coolant Temperature Gauge; Handlebar Switches - Yamaha Vmax VMX12N Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
1
1. Tachometer
2. Red zone
Tachometer
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
Do not operate the engine in the
tachometer red zone.
Red zone: 8,500 r/min and above

1. Coolant temperature gauge

2. Red zone
Coolant temperature gauge
With the key in the "ON" position, the
coolant temperature gauge indicates
the temperature of the coolant. The
EC000003
coolant temperature varies with chang-
es in the weather and engine load. If
the needle reaches or enters the red
zone, stop the motorcycle and let the
engine cool. (See page 6-47 for further
instructions.)
Do not operate the engine if it is
overheated.
1. Dimmer switch "LIGHTS"
2. Turn signal switch "TURN"
3. Horn switch "HORN"

Handlebar switches

Dimmer switch "LIGHTS"
Set the switch to "HI" for the high beam
and to "LO" for the low beam.
Turn signal switch "TURN"
To signal a right-hand turn, push this
switch to the right. To signal a left-hand
EC000002
turn, push the switch to the left. When
released, the switch returns to the cen-
ter
3 - 3
position.