Helmet Holder - Yamaha Vmax VMX12N Owner's Manual

1. Bolt (x 2)
2. Screw (x 2)
2. Remove the bolts and screws, and
then pull the rider seat off.
INSTRUMENT AND CONTROL FUNCTIONS
1. Projection
2. Seat holder
To install the rider seat
1 . Insert the projection on the front of
the rider seat into the seat holder
as shown.
2. Place the rider seat in the original
position, and then tighten the bolts
and screws.
NOTE:
Make sure that the seat is properly se-
cured before riding.
3. Return the rider seat backrest to
the original position.
3 - 1 0

1. Helmet holder

2. Open
Helmet holder
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in
the original position, and then remove
the key.
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an accident.
EAU00260
EW000030