Sherwood TX-5505iD Operating Instructions Manual page 15

TX-5505iD(G)_ENG_101110_TX-5505iD(G)_ENG 2010-11-10 오전 9:30 페이지 15
TP search
• Use this function to automatically search and receive the
stations broadcasting the traffic program.
1.
Perform the steps 1 and 2 in "RDS search"
procedure on the previous page to select "TP".
• Then "SEARCH > TP" is displayed on the RDS menu for
several seconds.
• When the RDS menu is not displayed, repeat again from
the above step 1.
2.
Start TP search.
• The tuner automatically searches for stations
broadcasting the traffic program.
• If the signal is too weak or there are no stations
broadcasting the traffic program, "NO TP" flickers for
several seconds.
Displaying RDS information
• While listening to RDS broadcasts,
• Each time this button is pressed, the display mode
changes as follows:
Program Program
→ →
Service name
(PS) (PTY)
*
: Possible only when the preset station has a name.
• If the signals are too weak or no RDS service is available,
RDS information may not be displayed.
Clock Radio
Station
→ → →
Text
Type Time
name
(CT) (RT)
*
15