Appzone - Teleorigin RB900 User Manual

12. AppZone

AppZone is a Telit's software layer built on the top of the basic software of the module
that provides a set of interfaces to the most of the module functionalities, e.g.: GSM/GPRS
services and hardware resources. The AppZone layer allows the M2M "C" language
application of the customer to run on the CPU of the module. This solution does not
require an external application processor to run the customer application. AppZone
feature is available in GPRS modem variant only.
The customer can develop an M2M application that addresses a wide range of different
applications such as remote monitoring and control, security and surveillance, telemetry,
location services, billing, fleet management, etc. The application, running on the CPU of
the module, via the AppZone API [8] can access the module resources hereunder
specified:
- Operating System:
- HW/SW resources:
- GSM/GPRS:
- Networking:
Refer to document [8] for information on module hardware resources.
Signals, Semaphores, Timers, Dynamic Memory Management, etc.
GPIO, I2C, RS232, File-System, Keypad, RTC, etc.
Access and control of the communication services.
BSD socket support, SSL capabilities.
34