Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: DAP TCD-100BT Remote Control (batteries not included) ...
TCD-100BT Do not switch the system on and off in short intervals, as this would reduce the system’s life. Do not open the device and do not modify the device. Only use system indoor, avoid contact with water or other liquids.
TCD-100BT Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
TCD-100BT Description of the device Features TCD-100BT is a CD/USB/SD/Bluetooth-Player from DAP Audio. Slot in CD running gear USB slot SD/MMC slot Bluetooth connect Anti shock memory (40 seconds) Program mode, random mode ...
TCD-100BT Rear side Antenna connector CD RCA L/R Output Bluetooth RCA L/R Output AC Inlet with integrated fuse holder Tuner RCA L/R Output Remote Control Track Buttons Prog Button Direct Button Button Button MO/ST Button M-Up Folder Button Down Button...
TCD-100BT Installation TCD-100BT Installation Remove all packing materials from the device. Check that all foam and plastic padding is removed. Screw the device in a 19“ Rack. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing.
TCD-100BT Names and Functions Below is a description of the functions of the controls. Power ON/OFF Use the power switch to turn the device on or off. USB Slot Use this slot to connect your USB stick for playback. Disc SLot Place the CD gently in the slot.
Page 10
20,49) ASM Button In Tuner mode (Tuner (12) LED is lit): If ASM is activated, the TCD-100BT will scan the FM band for stations and automatically store them in memory. If you decide to exit ASM before the search is finished, press the ASM button again.
Page 11
Prog Button If the TCD-100BT is in CD mode (CD (9) LED is lit): Stop playback and press the Prog button, the player will enter the program mode. For more information, see the section CD/MP-3 Operations on page 12-14. If the TCD-100BT is in Tuner mode (Tuner (12) LED is lit), This button let’s you store your favorite radi ostations in up to 60 memory locations.
Page 12
If the TCD-100BT is in CD mode (CD (9) LED is lit), this button toggles the ID3 info on or off. If the TCD-100BT is in Tuner mode (Tuner (12) LED is lit), this button let’s you switch the tuner in Mono or Stereo mode.
12:1. An MP3 disc can record music for playback over 600 minutes or record over 170 songs in a sound quality that fully matches the sound quality of CD’s. An USB stick can record even more. Obviously the TCD-100BT works also with normal audio CD’s. CD Audio Play Mode Four different play modes are available in CD mode: PLAY ALL, PLAY ALL RANDOM, REPEAT TRACK and REPEAT ALL.
Page 14
TCD-100BT Selecting Folders Forward In Stop mode: Press the Folder (26, 37) button to move to the next folder. In Program entry mode: Pressing the Folder (26, 37) button will skip the current file and select the next folder’s first file.
Page 15
TCD-100BT MP-3 Program Play 01) Make sure the unit is in CD mode when using the remote control. 02) Press the Stop (06, 47) button, the playback will stop. 03) Press the Prog (24, 48) button, the player will enter the program mode.
Selecting a Preset Station The TCD-100BT allows you to store your favorite radio stations in up to 60 memory presets. Select a preset by using the Select (34) buttons and/or the +10 (36) button. As an alternative you can use the...
03) Areas that are affected by heat from indoor heaters, etc. Maintenance DAP Audio TCD-100BT requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid.
03) If all of the above appears to be O.K., plug the unit in again. 04) If nothing happens after 30 seconds, unplug the device. 05) Return the device to your DAP Audio dealer. Product Specification Model: Dap Audio TCD-100BT Power Supply: AC 230V – 50/60 Hz Power consumption: 50 Watt CD unit: Mechanical &...
Need help?
Do you have a question about the TCD-100BT and is the answer not in the manual?
Questions and answers