Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: DAP UBR-180BT Remote Control ...
UBR-180BT Never leave any cables lying around. Do not insert objects into air vents. Do not connect this system to a dimmerpack. Do not switch the system on and off in short intervals, as this would reduce the system’s life.
UBR-180BT Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International EU Cable UK Cable US Cable BROWN YELLOW/COPPER FASE BLUE BLACK...
UBR-180BT Description of the device Features UBR-180BT is a SD/MMC/USB compatible MP3 Player/ Bluetooth player /Recorder from DAP Audio. Bluetooth connect USB slot SD/MMC card slot Program mode Full function infrared remote control Stereo output RCA (Line out) ...
UBR-180BT Installation UBR-108BT Installation Remove all packing materials from the device. Check that all foam and plastic padding is removed. Screw the device in a 19“ Rack. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing.
Page 9
UBR-180BT 7, 42) Cue Press this button to skip to the next track. Press and hold this button to play the track fast forward. 8) Rec level VU meter: Allows you to monitor the Aux in (26) input to record without distortion by using the Rec input vol (24) control.
Page 10
UBR-180BT 24) Rec input vol: Use this control to adjust the level of the Aux in (26) input. Make sure the red LED of the Rec level (8) VU meter does not light and that the orange LED only lights up occasionally.
UBR-180BT Operations 1. Play Modes Three different play modes are available: REPEAT, REPEAT ALL, REPEAT ALBUM When you press the Repeat (12, 32) button, you can choose between the following play modes: 01) Repeat: Repeats a single track several times.
UBR-180BT 7. Stop Playback There are two ways to stop playback: 01) Press the Play/Pause (11, 36) button during playback to pause at that point. 02) Press the Stop (10, 37) button during playback to return to Stop mode. 8. Pausing ...
UBR-180BT Press the stop (10, 37) button when you’re finished recording. The display will show REC OK as shown in figure 09. Fig. 09 Now your recording is finished. The first time you’re recording from the Rec input (24), the UBR-108BT will automatically generate a folder on the medium you’re recording on, named RECORD\EXREC.
UBR-180BT Maintenance The DAP Audio UBR-108BT requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents.
Need help?
Do you have a question about the ubr-180bt and is the answer not in the manual?
Questions and answers