Page 2
Congratulations! You have bought a great, innovative product from DAP Audio. DAP Audio DS-610 brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products.
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: • DAP DS-610 • Remote control • 2x AAA battery •...
Never remove warning or informative labels from the unit. Never use anything to cover the ground contact. Never leave any cables lying around. Do not insert objects into air vents. Do not connect this system to a dimmerpack. Do not switch the system on and off in short intervals, as this would reduce the system’s life. Do not open the device and do not modify the device.
Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International EU (including UK) North America From April 2004 Brown Black Phase Blue White Neutral Green/Yellow...
Description of the device Features The Darkshade DS-610 is a fully digital media player. It can read both SD-card and USB-stick and can play any MP3 song you want. The big bright LCD display makes selecting songs very fast and easy.
Frontview Fig. 2 1) Power ON/ OFF Switch 14) Pitch Control 2) CD slot 15) Cue Level Control 3) CD/ USB Button 16) Master Volume Control 4) LCD Display 17) Open/ Close 5) Cue Button 18) Time Button 6) Reverse Button 19) Program Button 7) Fast Forward Button 20) Single Button...
Installation Remove all packing materials from the DS-610. Check that all foam and plastic padding is removed.. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty.
Page 11
18/ 35. Time: Press this button to switch the Time-Display between the elapsed time and remaining time. 20/ 44. Single (SGL): Press this button to switch between the single and continuous play mode. If single mode is selected, the button is lit. In single mode, the unit stops playing after each track. In continuous mode, the unit plays all tracks and then stops.
Operations 1. Selecting Tracks Using the Skip buttons • Press the Sip-buttons to move to a higher or lower track. • Hold the Skip- buttons to change tracks continuously at a higher speed. • When a new track is selected during playback, playback begins as soon as the skip search operation is completed.
6. Cueing • "Cueing" is the action of preparing for playback. • Press the Cue button, the player will enter Cue-Mode, the playback returns to cue point and enters pause condition, the Cue indicator lights up and the Play indicator flashes. When Play/Pause button is pressed, play starts from the cue point.
11. Loop PLAY 1. Press the Loop IN button to set the loop start point, the Loop indicator will flash on the LCD. 2. Press the Loop OUT button to set the loop end point. After the end point is set, the playback will enter the loop play from start point to end point repeatedly.
Maintenance DAP DS-610 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth.
Need help?
Do you have a question about the DS-610 and is the answer not in the manual?
Questions and answers