Language; Serial Number - DEFA SmartStart User And Installation Manual

SETTINGS

LANGUAGE

English is the default language. This is how you change the language.
The Language setting can be found under Settings.
1 - Activate SmartStart™
2 - Press 1x Menu
3 - Press 6x Arrow down to go to Settings.
4 - Press 1x Ok
5 - Press 10x Arrow down to get to Language and Ok.
6 - Press 4x Arrow down and select English and Ok. Use the
Arrow key up/down to select other languages. Confirm with Ok.
If you press the right key according to point 4, the setting process
is interrupted.

SERIAL NUMBER

To get the hand-held RC to communicate with the unit in the vehicle VU,
the vehicles serial number (Number on the VU) has to be entered in the
handheld unit. You only have to do this if the RC or VU is bought as a
spare part.
The Serial Number can be found under Settings.
1 - Activate SmartStart™
2 - Press 1x Menu
3 - Press 6x Arrow down to go to Settings.
4 - Press 1x Ok
5 – Press 11x Arrow down to get to Serial Number and Ok
6 – Select the first figure in the serial number with arrow up or down
and confirm Ok to go to next figure. Repeat this with the rest of the serial
number and store the result with Ok. On the last figure the selection and
the unit tries to communicate with the vehicle. If contact is established be-
tween the units, the number is stored. If contact is not established, check
that the correct number has been entered.
If you press the right key according to point 4, the setting process
is interrupted.
1x
1x
1x
The Serial Number is 8 figures long (1XXXXXXX), it is shown
on the VU fitted in the vehicle.
13
?
6x
1-12x
10x 1x
11x 1x
10000000
Swedish
Finnish
German
Norwegian
10000000
0
9