Temperature Units; Temperature Calibration - DEFA SmartStart User And Installation Manual

SETTINGS

TEMPERATURE UNITS

Select display in Celsius or Fahrenheit degrees.
The temperature format can be found under Settings.
1 - Activate SmartStart™
2 - Press 1x Menu
3 - Press 6x Arrow down to go to Settings.
4 - Press 1x Ok
5 - Press 9x Arrow down to get to Temperature units
and select Ok
6 - Press 1x Arrow down and select Unit and Ok.
Use arrow key up or down to change between Celsius and
Fahrenheit. Confirm selection with Ok or cancel with the right button.
If you press the right key according to point 4, the setting process
is interrupted.

TEMPERATURE CALIBRATION

Select calibration to calibrate the temperature sensor with other equipment
in your vehicle.
Temperature calibration can be found under Settings.
1 - Activate SmartStart™
2 - Press 1x Menu
3 - Press 6x Arrow down to go to Settings.
4 - Press 1x Ok
5 - Press 9x Arrow down to get to Temperature units
6 - Press 2x Ok to get to Calibrate
7 - Use Arrow up/down to Calibrate. Confirm selection with Ok.
If you press the right key according to point 4, the setting process is
interrupted.
1x 6x
1x
1x
Calibrate with other equipment in the vehicle. Use the arrow
keys to correct in the area +/- 3ºC. The correction takes place
in Celsius equivalent to 1.8ºF. Save the correction with Ok.
12
?
1-12x
9x 1x
9x 2x
1x
Celsius
Fahrenheit
+/- o C