Xerox 4050 Product Reference page 13

Features
Component Features
Interface Several optional interfaces offer a variety of connection options, such as:
•
•
•
•
•
System controller
•
•
•
•
•
•
•
•
•
•
•
Printer Functionality:
•
•
•
•
•
•
•
•
•
•
•
•
Paper handling:
•
•
•
XEROX 4050/4090/4450/4650 LPS PRODUCT REFERENCE
The 4050/4090/4650 LPS has many standard features which allow
you to process and print data using a variety of sources. The
features for each main component are listed below. Table 1-2
lists the differences among the components of the LPS.
Reference Refer to the "LPS comparison" appendix for a comparison of the
4050/4090/4650 LPS components with other Xerox printers.
Refer to the Xerox 4450 Mid-Range Printer Product Reference for
information on the component features of the 4450 MRP.
Table 1-2.
Online
Offline
OEM
DEC
Ethernet.
Multinational terminal
4050/4450 LPS: Two standard 50 MB system disks. Optional expansion of up to
200 MB in 50 MB increments is available.
4090/4650 LPS: Two standard 170 MB system disks. Optional 170 MB, 182 MB, or
380 MB system disks are available for expansion.
512 KB of control memory
16 MB of font memory (4050/4450 LPS). 128 MB of font memory (4090/4650 LPS).
4050/4450 LPS: Graphics Handling Option (GHO) with 8 MB of graphics memory.
4090/4650 LPS: Graphics Video Generator (GVG) 32 or 256 MB option
Optional Raster Image Processor (RIP) for increased graphics capabilities
5.25-inch floppy disk drive
Optional 9-track magnetic tape drive with 1600 or 6250 bits per inch (bpi)
Optional 18-track 180 Cartridge Tape System (CTS) with read and write capability for
IBM- and ANSI-compatible 0.5 inch tapes in 18-track, IBM 3480 data format.
Xerographic engine
Laser raster scanning
Printing speed of up to 50 pages per minute (ppm) for the 4050/4450/4650 LPS, up
to 92 ppm for the 4090 LPS, and up to 7,500 lines per minute (lpm).
Output of 300 by 300 spots per inch (spi) for the 4050/4090/4450 LPS or 600 by 600
spi for the 4650.
Light-emitting diode (LED) display showing feeder and stacker tray configurations
Ability to print on only the front (simplex) or both front and back (duplex) of paper
Graphic display of the printer on the control console helps you clear paper jams
Stop, Continue, Print Sample, and Tray Select buttons
Controls paper stock using multiple feeder trays and high-capacity feeder option
Output module options
Sample print tray
Diagnostic jam clearance.
Prints index, cut-sheet, colored, preprinted, predrilled, or preperforated paper from
20 pound/75 gsm paper to 110 pound/200 gsm paper
Prints in variable paper sizes from 8 by 10 inches to 8.5 by 14 inches, including 8.27
by 11.69 inches (A4) with an image size up to 8.6 by 11 inches
Prints transparencies, label stock, and other specialized materials
Component features
OVERVIEW
1-3