Table of Contents
Advertisement
Section 2 - - Installation
FCR302C4: Created specifically for use with the 3M Model 2210 CREIB INTERFACE to a Fuji COMPUTED
RADIOGRAPHY SYSTEM. This TFT SET should not be used for any other application. The 15 TFTs in this
SET are designed to be used in correspondence with the 15 Dmax choices of the IMAGER, using Contrast
1 when the first Dmax value is used, etc. The plots in the chart below indicate a sagging shape, which is
characteristic of a "linear in density" behavior, until maximum brightness (Dmin) is approached, at which point
the curves become flat.
2005 July Rev. B
7F3318
2-55
Advertisement
Table of Contents
Troubleshooting
