Table of Contents
Advertisement
POWER—Connects the residential gateway to the AC power adapter that is
2
provided with your residential gateway
Important: Use only the power supply provided with your residential gateway.
3
TELEPHONE 1 and 2—RJ-11 telephone ports connect to home telephone wiring
to conventional telephones or fax machines. (Products shipping in North
America support lines 1 and 2 on port 1 when used with a two-line phone.)
4
USB (Optional for some models)—Connects to selected devices. For models that
support USB, the default is one USB port.
ETHERNET—Four RJ-45 Ethernet ports connect to the Ethernet port on your PC
5
or your home network
6
RESET—A momentary pressing (1-2 seconds) of this button performs a software
reset the device. Pressing and holding the button for more than ten seconds first
causes a reset-to-factory-default of all settings and then performs a software reset
of the device
7
MAC ADDRESS LABEL—Displays the CM, EMTA, and WAN MAC addresses
for the residential gateway
CABLE—F-connector connects to an active cable signal from your service
8
provider
OL-29 161 -01
CAUTION:
The RESET button is for maintenance purposes only. Do not use unless
instructed to do so by your service provider. Doing so may cause you to lose
any settings you have selected.
Back Panel Description
7
Hide quick links:
Advertisement
Table of Contents
