Table of Contents
Advertisement
Power Linking
Battery Power
Charging the
Battery
Battery Life
Indicator
Battery Run
Time
Setting the
Limiter Option
Page 8 of 21
Daisy chaining products together through their Power In and Power Out sockets, called power linking,
allows many products to be powered from one power outlet
Up to 26 Freedom™ Par Hex-4 products can be power linked at 120 V, and up to
50 Freedom™ Par Hex-4 products can be power linked at 230 V.
The Freedom™ Par Hex-4 comes with a rechargeable lithium battery for cable-free operation.
The battery charges whenever the product is plugged into a power source. If the product is plugged in and
not in operation, make sure the On/Off switch is in the Off position.
For optimal battery life, charge the Freedom™ Par Hex-4 battery for 24 hours prior to initial use.
The
battery
life
indicators
D-Fi™ <AUTO> button. The indicators show how much battery life remains available. The diagram below
provides a key to reading the battery life indicators.
100%
The Freedom™ Par Hex-4 has a limiter option that decreases the power output and extends battery life
when more than 4 colors are turned on. This option is set in the control panel.
Note: The battery times listed below assume that the limiter option is enabled.
Maximum Run Time
(all colors on)
Up to 8 hours
To select whether the limiter is on or off, follow the instructions below:
1.
Press <MENU> repeatedly until Limi shows on the display.
2.
Press <ENTER> and On (activates limiter) or OFF (deactivates limiter) shows on the display.
3.
Use <UP> or <DOWN> to select the desired option.
4.
Press <ENTER>.
are
the
4
small
75%
50%
Maximum Run Time
(single color on)
Up to 20 hours
green
LEDs
on
either
D-Fi™ AUTO Button
25%
Recharge Time
Freedom™ Par Hex-4 User Manual Rev. 1
side
of
the
6 hours
Hide quick links:
Advertisement
Table of Contents
