Installing The Main Unit In A Nissan Vehicle; Installing The Main Unit In A Toyota Vehicle - Clarion NX605 Installation Manual

❏ Installing the Main Unit in a NISSAN Vehicle
Main Unit
Finisher ✽ 1
Mounting bracket
(1 pair for the left and right sides)
Figure 3
✽ 1 Position the face panel with its wide edge at the bottom. Fit the edge into the groove of the main
unit.
58 NX605
❏ Installing the Main Unit in a TOYOTA Vehicle
Install by using parts attached to the vehicle. (Screws marked
6-Spacer (thickness: 1 mm)
6-Flat head screw
(M5 x 8)
(attached to the main unit)
Center Panel
✽ 2 Some panel openings are too small for the unit depending on the vehicle type and model. In
such a case, trim the upper and lower sides of the panel frame by about 0.5 to 1.5 mm so the
unit can be inserted smoothly.
✽ 3 If a hook on the installation bracket interferes with the unit, bend and flatten it with a nipper or
similar tool.
Typical Mounting Brackets
Main Unit
✽ 3
✽ 2
Figure 4
Example 1 Example 2
Affix the screws to the marks.
are attached to the vehicle.)
8-Hexagonal screw
(M5 x 8)
Mounting bracket
(1 pair for the left
and right sides)
Example 3