Before Using Scale - Conair Weight Watchers WW88WRC Instructions For Use Manual

Precautions for Use
CAUTION! Use of this device by persons with any electrical implant such
as a heart pacemaker, or by pregnant women, is not recommended.
1. Remove all packaging materials. Locate batteries in box and remove wrapping,
if any.
2. Locate battery compartment on the back of the scale.
3. Lift battery cover and insert batteries one at a time, negative end first. Correct
polarity is shown in schematic molded into battery compartment.
4. Close battery door.
5. Set switch on the base of scale to measure in KG (kilograms) or LB (pounds).
6. Set scale on floor. Surface must be level for accurate operation and safety.
Weight Measurement Only
To measure weight only:
1. Operate the scale on a secure flat floor.
2. Choose pounds (lb) or kilograms (kg) by switching
the convertible switch on rear of scale.
3. Tap the scale to turn it on.
4. Wait until all digits light for a few seconds and
"0.0" appears.
5. Step on the scale and stand still to measure
your weight.
6. Step off the scale and it will shut off automatically.
Personal Data Setting Mode
Setting the User Number
1. Tap the scale to turn it on. Wait until "0.0" appears, then press
the "SET" button. User number "1" will flash; press "UP" or
"DOWN" button to select another user number. Press the SET
button to confirm.
Setting the User height
2. Default height flashes. Press "UP" or "DOWN" button to get
the correct height. Pressing and holding either the "UP" or the
"DOWN" arrow will advance numbers quickly. Press "SET" button
to accept the height.
Setting the Age
3. "AGE" appears and default age will flash. Press "UP" or "DOWN"
button to select your age. Once the correct age has been
reached, press "SET" button to confirm.
Setting Gender
4. Default gender icon flashes. Press "UP" or "DOWN" to choose
between male and female gender. Press "set" button to confirm.

Before Using Scale