Advertisement
Before Using Scale
1. Remove all packaging materials. Locate batteries in box and remove wrapping, if
any.
2. Locate battery compartment on the back of the scale.
3. Lift battery cover and insert batteries one at a time, negative end first. Correct
polarity is shown in schematic molded into battery compartment.
4. Close battery door.
5. Set switch on the base of scale to measure in KG (kilograms) or LB (pounds).
6. Set scale on floor. Surface must be level for accurate operation and safety.
To Measure Weight
• The scale will turn off automatically.
2. If you step on the scale before "00.0" appears, the scale will not function properly.
3. "Lo" will appear if battery is low and needs to be replaced.
• Tap the center of the scale with your foot to turn it
on. The display lights up.
• Wait until "00.0" appears.
• Step onto the scale and stand still. You will see the
display "000" flash for a few seconds before your
weight displays.
Note:
1. "Err" will appear if the scale is overloaded (over
182KG/400LB).
Advertisement
