Advertisement
Before Using Scale
1. Remove all plastic shields from the base of the scale.
2. Set switch on the base of scale to measure in kg (kilograms) or lb (pounds).
3. Set scale on floor. Surface must be level for accurate operation and safety.
Weighing In
This Weight Watchers scale has a unique weight tracking technology that allows
users to track their start weight, their last weight, and their goal weight and
compare those weights to current weight.
In addition, this model contains proprietary leveling technology that helps you to
stand on the scale in perfect balance, making your weight measurements truly
repeatable and comparable over time.
To Measure Weight Only
• Operate the scale on a secure flat floor.
• Choose pounds (lb) or kilograms (kg) by switching the
convertible switch in the back of the scale before
stepping on the scale.
• Tap on the scale; "888.88" appears on the display.
• Wait until "0.0" appears.
• Step onto the scale; adjust your position on the scale according to the
leveler indicators on the display. The indicators show where you are off center.
(Screen below shows that weight needs to be shifted to the right of the scale.)
When center diamond lights up, it indicates ideal balance for accurate and
repeatable weight measurement.
Off-center position
• Weight reading appears, blinks several times,
and then shows on the display.
• After you step off the scale, your weight reading stays for
a few seconds, then the scale turns off automatically.
Note:
The second decimal place of a kg reading is shown as a small number in the
upper right corner. For example:
"Err" will appear on the display if the weight is over 380lb or 172kg.
Center position
Advertisement
