Base Plastics - Dell Latitude V710 Service Manual

Base Plastics: Dell Latitude V710/V740 Service Manual
Back to Contents Page

Base Plastics

Dell™ Latitude™ V710/V740 Service Manual
Removing the Base Plastics
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE: Read
following procedure.
1. Remove the
2. Remove the
3. Remove the
4. Remove the modem.
5. Remove the keyboard.
6. Remove the
7. Remove the
8. Remove the
9. Remove the
10. Remove the
11. Remove the speakers.
12. Remove the
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/base.htm (1 of 3) [2/28/2004 8:22:20 AM]
"Preparing to Work Inside the
hard drive.
optical drive.
floppy drive.
display assembly.
EMI Shield.
video board.
palm rest.
microprocessor thermal-cooling
system board.
Computer" before performing the
assembly.