Table of Contents
Advertisement
Display Assembly and Display Latch: Dell Latitude V710/V740 Service Manual
1 M2.5 x 5-mm screws (4)
2 hinge blocks (2)
3 M2.5 x 5-mm screws (2)
4 display-feed flex cable
5 pull tab
6. Pull up on the pull tab that is attached to the display-feed flex cable connector to remove
the connector from the system board.
7. Remove the two M2.5 x 5-mm screws from each hinge block.
file:///F|/Service%20Manuals/Dell/Latitude/v710-740/display.htm (3 of 10) [2/28/2004 8:22:14 AM]
Advertisement
Table of Contents
