How To Check - Daewoo FRS-U20DD. Service Manual

8-3. Dispenser Micro Switch
1) Disassembling Procedure
NO DISASSEMBLING PROCEDURE
1
- Insert (-) screw driver into bottom hole of
dispenser button guide.
Pull up forward to remove the guide.
(Be careful not to damage guide surface.)
2
- Remove Micro switch.
2) How to Check Micro Switch
PARTS
SPEC. NAME
: VP333A-OD-8
VOLTAGE
:125V,3A
- Check both terminals
(red circle) with a Multi Tester
(Tester Mode : Resistance.

HOW TO CHECK

NO DISASSEMBLING PROCEDURE
3
- Separate wire connectors
from Micro Switch.
4
- Check Micro Switch.
- GOOD :
Tact Switch
(Blue Circle)
ON (Close)
OFF (Open) Disconnected
- DEFECTIVE :
Change Micro Switch.
37
CRITERION
Terminals Tester Result
(Red circle) (Resistance Mode)
Connected Some Value
No value (0)