How To Enter This Check Mode; The Front Led Displays The Current Error Code; How To Exit This Mode; Error Code - Daewoo FPS-X22D1 Series Service Manual

Mineral water refrigerator
Table of Contents

Advertisement

1. How to enter this check mode

1) Push the LOCK button.
2) Push the WATER button 5 times while pressing the FRZ.SET button.
2. The Front LED displays the current error code ( if happens ).
; Every time you press the Freezer Set button, the following value display.
1) The appliance running time. ( From the plug in. )
2) Freezer sensor temperature.
3) Defrost sensor temperature.
4) Refrigerator sensor temperature.
5) Room temperature.
6) P Factor display.

3. How to exit this mode

1) Push the LOCK button.
2) After 4 minutes automatically exit.

4. Error Code

Display (Error Code)
No
1
2
3
4
5
6
dH
7
8
9
10
11
12
13
14
15
16
; All Error Code reset, when the relative parts turn into normal.
F1
Freezer sensor disconnection or short
r1
Refrigerator sensor disconnection or short
rt
Room temperature sensor disconnection or short
d1
Defrost sensor disconnection or short
dr
Refrigerator Door switch is defective.
dF
Freezer Door switch is defective.
Home bar door switch is defective. ( *Home bar models only )
El
Ice sensor disconnection or short
Et
Horizontal switch error
Eg
Water supply error
EA
Drop the ice while Et
Eu
Full ice switch error
C1
Abnormal or defective cycle
F3
Return after defrosting : abnormal or defective
Co
Pull-Down mode display (No error)
d2
Forced Defrost mode display (No error)
Remark
11
Error Display

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents