Black & Decker LST220 Instruction Manual page 11

• Push the cap onto the
housing until it snaps securely
into place.
CAUTION:
To avoid tool
damage, if the cutting line
protrudes beyond the trimming
blade, cut it off so that it just
reaches the blade.
REWINDINg SPOOL FROM BULK LINE
(USE ONLY .065 IN. ROUND DIAMETER LINE) (FIgURES 15, 16, 17)
Bulk line is also available for purchase from your local retailer.
NOTE: Hand wound spools from bulk line are likely to become
tangled more frequently than BLACK+DECKER factory wound
spools. For best results, factory wound spools are recommended.
To install bulk line, follow the steps below:
• Remove battery from tool.
• Remove the empty spool from the tool as described in
"REPLACINg THE SPOOL".
• Remove any remaining cutting line from the spool.
• Make a fold at the end of the cutting line at about 3/4 inch
(19mm)(r). Feed the cutting line into one of the line anchoring
slots (s) as shown in figure 15.
14
q
15
s
• Insert the 3/4 inch (19mm)
end of the bulk line into the
hole (t) in the spool adjacent
to the slot as shown in
figure 16.
o
• Wind the cutting line onto the spool in
the direction of the arrow on the spool.
Make sure to wind the line on neatly and
in layers. Do not crisscross (figure 17).
• When the wound cutting line reaches
the recesses (u), cut the line. (figure 16).
• Fit the spool onto the tool as described
in "REPLACINg THE SPOOL".
THE RBRC™ SEAL
The RBRC™ (Rechargeable Battery
r
Recycling Corporation) Seal on the LI-ION
battery (or battery pack) indicates that the
costs to recycle the battery (or battery pack) at the end of its useful
life have already been paid by BLACK+DECKER.
RBRC™ in cooperation with BLACK+DECKER and other
battery users, has established programs in the United
States to facilitate the collection of spent LI-ION batteries.
Help protect our environment and conserve natural resources by
returning the spent LI-ION battery to an authorized BLACK+DECKER
service center or to your local retailer for recycling. You may also
contact your local recycling center for information on where to
11
u
16
t
17