Troubleshooting Guide; Service Information - Black & Decker Fire Storm FS110L Instruction Manual

10” compound laser miter saw

Hide thumbs

Table Of Contents

Table of Contents

Available languages

BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS

TROUBLE! SAW WILL NOT START

WHAT'S WRONG?

1.Saw not plugged in.

2.Fuse blown or circuit breaker tripped. 2.Replace fuse or reset

3.Cord damaged.

4.Brushes worn out.

TROUBLE! SAW MAKES UNSATISFACTORY CUTS

WHAT'S WRONG?

1.Dull blade.

2.Blade mounted backwards.

3.Gum or pitch on blade.

4.Incorrect blade for work being done.

TROUBLE! BLADE DOES NOT COME UP TO SPEED

WHAT'S WRONG?

1.Extension cord too light or too long.

2.Low house current.

TROUBLE! MACHINE VIBRATES EXCESSIVELY

WHAT'S WRONG?

1.Saw not mounted securely.

2.Stand or bench on uneven floor.

3.Damaged saw blade.

TROUBLE! DOES NOT MAKE ACCURATE MITER CUTS

WHAT'S WRONG?

1.Miter scale not adjusted correctly.

2.Blade is not square to fence.

3.Blade is not perpendicular to table.

4.Workpiece moving.

TROUBLE! MATERIAL PINCHES BLADE

WHAT'S WRONG?

1.Cutting bowed material.

Service Information

Black & Decker offers a full network of company-owned and authorized service locations throughout North America. All Black & Decker Service Centers

are staffed with trained personnel to provide customers with efficient and reliable power tool service.

Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you.

To find your local service location, refer to the yellow page directory under "Tools—Electric" or call: 1-800-54-HOW TO (544-6986).

Accessories

CAUTION: The use of any non-recommended accessory such as dado sets, molding cutters or abrasive wheels may be hazardous.

Full Two-Year Home Use Warranty

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or

repaired at no charge in either of two ways:

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating

retailer). Returns should be made within the time period of the retailer's policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may

be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.

The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our

option. Proof of purchase may be required. Black & Decker owned and authorized service centers are listed under "Tools-Electric" in the yellow pages of

the phone directory.

This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state.

Should you have any questions, contact the manager of your nearest Black & Decker Service Center.

This product is not intended for commercial use.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement.

Special WARRANTY Note to Contractors:

FIRESTORM

branded products are offered as high end consumer home use tools and carry a HOME USE WARRANTY. These tools are

designed, manufactured and tested to meet or exceed the needs of the do-it-yourselfer in the execution of projects and repairs in and around the

home. With proper use they will provide the home owner with step up power and performance well beyond their two year warranty. However, if you use

tools for a living and use FIRESTORM

should know that they CANNOT BE COVERED UNDER OUR WARRANTY.

Trouble Shooting Guide

WHAT TO DO...