Switching On The Devices - Gigaset SX682 WiMAX User Manual

If your analogue terminal has a TAE plug, first connect this to the adapter (connect a
telephone to the F-coded socket, a fax machine or answer machine to the N-coded
socket). Then connect the adapter plug to the Phone connection on the Gigaset SX682
WiMAX.
ì
If necessary connect the telephone, fax machine or answer machine to the mains
power supply.

Switching on the devices

!
Only use the Gigaset SX682 WiMAX with the mains adapter supplied.
ì
Connect the mains adapter plug to the Gigaset SX682 WiMAX socket.
ì
Power up the PC.
ì
Connect the mains adapter to the mains power supply.
The system starts up and performs a self-test. After the self-test, the Gigaset SX682
WiMAX continually attempts to register with a WiMAX network. Registration may be
successful immediately. If not, registration will take place when the Gigaset SX682
WiMAX is being configured.
ì
Check the LEDs during startup:
LEDs during startup:
– The Power power supply LED lights up green, and the Gigaset SX682 WiMAX
starts a self-test. If the LED does not light up, check that the mains adapter is con-
nected correctly and the power socket is live.
– The LAN Ethernet LED is continuously lit green. If the LED does not light up,
check that the Ethernet cable is connected correctly.
– If registration with a WiMAX network has already been successful, the Online LED
lights up green. If the LED does not light up, register your Gigaset SX682 WiMAX
during configuration.
Connecting the Gigaset SX682 WiMAX
ì
Connect the plug on the ana-
logue terminal to the Phone
connection on the Gigaset
SX682 WiMAX.
19