Table of Contents
Advertisement
User Manual
H.Configure Server Property
Press
2.1.1.1.1
8
NO.
Functions
Best REC
1
Resolution
2
Watermark
Max ID
3
4
Camera
5
Installed
6
PTZ ID
7
Group
8
Download
9
Upload
A
Open
B
Save
to enter the server configuration page.
Pre-camera
1
6
5
4
9
A
B
Description
Select to adjust the recording resolution.
Click to watermark the video.
Click to set the maximum number of camera available on a specific
DVR.
This shows the camera of a specific DVR.
Click to activate the camera.
Assign an ID to the PTZ camera for identification purpose.
Allow the assignment of each camera into different groups.
This function enables user to download the original configuration from
the host system should any accidental modification occur. It also allows
user to reconfirm whether the modified configuration has been properly
updated to the host system.
Click to upload the modified configuration to the host system through
internet.
Click to apply the previously saved setting to the current configuration.
Press to save the setting to a specified location.
2
3
7
Advertisement
Table of Contents
