Table of Contents
Advertisement
User Manual
output(Optional)
Alarm
inputs(Optional)
Alarm
outputs(Optional)
Ethernet(Optional)
I/R remote controller
2.3.PTZ CAMERA:
Connect the RS-485 connector to PTZ camera(s) via the appropriate
cable.
The system supports a variety of different PTZ cameras,
including Pelco D protocol Dome, SamSung SCC-641P, Kalatel Cyber
Dome, Bosch AutoDome, etc.
But different PTZ cameras can coexist in a system only if they support
the same protocol.
Please make sure to set the PTZ ID of the camera(s), and setup
the camera and RS-232 or RS-422/485 accordingly.
from speakers
Connect the alarm inputs to NC and/or NO type of
alarm signals.
Connect the alarm output #1 to NC type of alarm signal,
or alarm output #2 to NO type of alarm signal.
Please note that only one of the NC or NO
connectors can be connected only.
Connect the Ethernet connector to a standard
twisted-pair Ethernet cable for remote access via LAN
or internet.
The user may use I/R remote controller to control the
digital video/audio recorder
21
Advertisement
Table of Contents
