Table of Contents
Advertisement
For the most part these settings are similar to those you can adjust on the DVR device,
though the menu layout and logic was slightly altered to better suit the PC configuration
philosophy. Please refer to Section 5.2 System Settings for configuration of the DVR
parameters.
Detailed description of the functionalities offered by each of these tabs follows. If a field is
grayed, it means it is not changeable and is for your reference only. If the field is
bluish-green, it means that you can adjust the value of the field or choose it from a
drop-down menu.
6.4.1.1 Server
The Server tab lets you adjust network settings. Most items here are self-explanatory and
correlate to the settings available on the actual DVR.
There are four subsections in this dialog window:
Device Configuration:
You can enter the device name and choose the Signal Standard
(NTSC/PAL/SECAM)
- 64 -
Advertisement
Table of Contents
