Connecting Attachment Hose - Riccar Vibrance VIB Owner's Manual

Attachment Cleaning
Connecting the attachment hose
to the vacuum cleaner
Pull out and open the suction control dial
by turning the lid located on the back of the
vacuum cleaner. Insert the soft, rubber end of
the hose into the cleaning attachment opening.
Push in while twisting the hose end
to ensure the hose is fastened securely.
NOTE: You can connect any of the cleaning
tools to the end of the extension wand(s)
and twist for a secure fit. To remove the
cleaning tool from the extension wand(s),
simply twist and pull apart.
WARNING
Models: VIBCLNT, VIBCL,
VIBS, VIBD, VIBCNT & VIBC
There is no way to turn the brushroll
off. Therefore, when using the cleaning tools it
is important to keep your Riccar vacuum from
running in the same spot for a period of time, as
carpet or flooring damage could result. If you
need to keep the vacuum in the same spot for a
period of time, such as at the base of the stairs
when cleaning the stairs, place something, like
a flattened cardboard box, under the vacuum to
prevent damage to the floor.
16