Summary Of Welding Processes - Lincoln Electric RANGER 9 IM753-A Operator's Manual

B-6
SUMMARY OF WELDING
PROCESSES
PROCESS CONTROL IDLE
CABLE
USED
Stick – CC No
TIG - CC Yes
K930-1/K936-1
(With Amptrol)
Wire Feed - CV, Yes
LN-25 with 42V
Remote Control Kit
Wire Feed - CV No
LN-25 with internal
contactor
Wire Feed - CV Yes
LN-742
Wire Feed - CV, Yes
LN-7
OPERATION
OUTPUT WELDING
MODE CONTROL TERMINALS STATE WHEN
SWITCH SWITCH
Auto At Welder
Auto Remote
Auto Remote
Auto At Welder
Auto Remote
High Remote
RANGER 9
ELECTRODE
NOT WELDING
Always on Hot
Remote Cold
Remote Cold
Always on Cold
Remote Cold
Remote Cold
B-6
TO START WELDING
Touch electrode to
work. Welding starts
immediately and engine
goes to high idle.
Press Amptrol. Welding
starts immediately.
Press gun trigger,
RANGER 9 contactor
closes. Welding starts
immediately and engine
goes to high idle.
Press gun trigger, LN25
contactor closes. Weld-
ing starts immediately
and engine goes to high
idle.
Press gun trigger,
RANGER 9 contactor
closes. Welding starts
immediately and engine
goes to high idle.
Press gun trigger,
RANGER 9 contactor
closes. Welding starts
immediately.