Features - Kicker subwoofer ES104 Owner's Manual

Features

Injection Molded Polymineral Cone with ISD
(Inverted Structural Dome)
composite, which remains rigid, minimizes cone flex and lowers
harmonic distortion. The ES Subwoofer's cone moves as a
light weight piston, exhibiting power and control.
Double Stitched Surround
the chemical adhesives. This duo prevents the cone and
surround from separating in the harshest conditions.
Optimized Polyfoam Ribbed Surround Radius
extended cone excursion for additional bass output and higher
SPL, and couples the suspension into a conjoined linear-
motion body.
High-Temp Polyimide Film Voice Coil Former
improves sonic and conductive properties, and prevents
thermal-electrical meltdown.
Ultra-Length Voice Coil
and provides extra heat dissipation.
High-Power Tinsel Lead Wires
power loss, due to the common use of "insufficient-gauge" lead
wires.
™
is a high performance
adds a mechanical fastener to
allows
sustains enormous cone excursion
eliminate broken leads and
ES Subwoofers
Spring-Loaded Nickel Plated Terminals
connect medium to heavy gauge speaker wire to the
high-power tinsel lead wires.
Two-Piece Vented Hyper-Extended Blackened Pole
Piece and Backplate
1. Optimizes heat transfer efficiency for cooler operation
and maximum power handling ability.
2. Eliminates erratic magnetic flux from the voice-coil gap.
3. Releases pressure under the suspension for uniform
cone movement and responsive low bass.
4. Prevents the voice-coil from bottoming out and
corresponding damage.
New Enhanced BAM (Basket and Motor) Assembly
utilizes a high strength steel basket, features a low-profile open
design, and provides a solid foundation for the
precision-aligned motor assembly.
Perimeter Venting in the BAM
under the spider, supports a linear excursion, and helps
dissipate heat from the voice coil and motor structure.
flawlessly
relieves pressure from
3