Menu Options - Chauvet Q-wash 260-LED Quick Reference Manual

Q-Wash 260-LED QRG

Menu Options

st
1 Level Programming Levels
ADDRESS
RESET
FANS
RUN
INTRO
CHANNELS
DISPLAY
KEYLOCK
DIMMER
INFO
PAN
TILT
INVERT
DIMMER
USE
P/START
P/FINISH
RANGE T/START
T/FINISH
USE
BLACKD
RESET
POWER
SPECIAL
COLOR
FAN
DMXERROR
STEP
PAN
EDIT
TILT
SPEED
Selects a starting DMX address
001~512
Resets the product's custom settings
NO/YES
Select the fan's operation mode.
HIGH
NOTE: Fixture's controller will force the fan to High if the
NORMAL
product's internal temperature becomes too high, despite any
LOW
manual or DMX setting
AUTO
Selects DMX running mode
DMX512
Selects the first automatic program
AUTO1
Selects the second automatic program
AUTO2
Selects the user customizable program
CUSTOM
Selects the first sound program
SOUND1
Selects the second sound program
SOUND2
Selects the Slave running mode
SLAVE
Starts the product's test sequence
TEST
Selects the 9-channel DMX mode
BASIC
Selects the 12-channel DMX mode
ADVANCED
Turns off the display after 60 seconds
60 CLOSE
Keeps the display on
BRIGHT
NO/YES Activates/deactivates the control panel password
Slow (DIM 4) to fast (DIM1) dimmer curves
DIMMER 4~1
Linear dimmer
DIMMER 0
Shows the version of the installed S/W
EDITION
Defines the pan direction
NORMAL/
Defines the tilt direction
REVERSE
Defines the direction of the dimmer fader
Activates the changes
NO/YES
Sets the pan start point (restricted range)
Sets the pan end point (restricted range)
Sets the tilt start point (restricted range)
000~255
Sets the tilt end point (restricted range)
Activates the changes
NO/YES Activates the move-in black delay (3 s)
The DMX controller can reset the product
DMX
The control panel can reset the product
SYSTEM
LEDs illuminate at normal or high intensity
NORMAL/
NOTE: The product will return to Normal if the internal
HIGH
temperature becomes too high
White output matches that of older products
UC
White output set by RGB-W
RGBTOW
White output defined by RGBW faders
OFF
DMX The DMX controller can set the fan speed
The control panel can reset the fan speed
SYSTEM
In case of lost DMX signal, the product will remain in its current
SAVE
state
In case of lost DMX signal, the product will blackout
BLAK
Selects the program step
Selects the pan position
000~255
Selects the tilt position
Selects the pan/tilt speed
Continues in the next page
Page 8 of 12
Description