Remote Control - Pioneer VSX-C550 Operating Instructions Manual

Displays & Controls

Remote Control

All the buttons on the remote control are explained here. See pages 49 & 50 for details relating to using the remote
control with other components (like your DVD player or TV/SAT tuner).
RECEIVER
1
2
3
DVR/ VCR
4
5
6
TOP MENU
7
P
AUDIO
8
P
SEARCH
9
0
22
En
SOURCE
SIGNAL SELECT
SLEEP
DVD TV / SAT FRONT
DIMMER
FM / AM
SOUND
AUTO
SURROUND ADVANCED
MODE
ROOM
SETUP
TEST TONE CH_SELECT
SETUP
ENTER
MUTE
MASTER
VOLUME
MENU
DISPLAY T.EDIT
TUNE
MENU
ST ST
ENTER
SUBTITLE
TUNE
EON RF ATT
GUIDE
EXIT
A
CLASS MPX D.ACCESS
B C D E
ENTER
10
TV CONTROL
INPUT
CHANNEL CHANNEL VOLUME
SELECT
RECEIVER
1 RECEIVER
This switches between STANDBY mode and power
-
ON for this receiver.
2 SIGNAL SELECT button (See p.44):
=
Press SIGNAL SELECT repeatedly to select one of
the following:
ANALOG: To select an analog signal.
~
DIGITAL: To select a digital signal.
!
AUTO: This is the default. If there are analog and
digital signals input, the receiver automatically
selects digital. If only analog is input the
receiver will select analog.
3 Input/Control Mode Select buttons:
Use to put the receiver/remote control in the input
mode stated on the button. The FM/AM button puts
the receiver in tuner mode if it was in another mode
and switches between the FM and the AM band if
@
the receiver was already in tuner mode.
4 Listening Mode buttons:
AUTO button:
#
Use this button for direct decoding of the input
signal with no added sound effects. The receiver will
automatically detect what kind of signal (stereo,
$
multichannel, etc.) is being input and play accord-
ingly.
SURROUND button (see page 34):
%
Use this button to choose one of the surround
listening modes this receiver is equipped with.
ADVANCED button (see page 34):
^
Use this button to choose one of the advanced
listening modes this receiver is equipped with.
SOUND MODE button (see page 35):
Use this button to choose one of the sound modes
this receiver is equipped with.
5 System setup buttons:
&
SETUP button (see page 27):
Use this button to start the receiver setup process
which adjusts the settings to your particular system.
TEST TONE button (see page 32):
Use to sound the TEST TONE when setting the
volume level of each channel.
CH SELECT button (see page 32, note):
Use to select a speaker when setting the volume
level of each channel.
ROOM SETUP button (see page 26):
Use to set the distance from your speakers to your
normal listening position.
+/– buttons (see pages 28–32):
Use these buttons when making adjustments to the
SETUP, TEST TONE, or CH.SELECT features.
(Power) button: