Using Eon - Pioneer VSX-C550 Operating Instructions Manual

Using the Tuner

Using EON

1
3
1 Press the
FM/AM
in FM tuner mode.
2 Tune into an FM station (see p. 36).
When an FM station is broadcasting a news of traffic
information program, the dot indicator (÷) lights in
the display to inform you that the currently tuned
station carries the EON data service.
3 Press the
EON
mode.
There are two EON modes: EON TA and EON
NEWS. EON TA will automatically search for traffic
reports and EON NEWS will automatically search for
news reports among your preset stations.
Each press changes the display as follows:
EON TA
4 EON mode has been set. If the receiver finds
such information in the EON-linked broad-
cast, it will automatically jump to it and the
EON indicator will blink while receiving the
broadcast.
The receiver is set to receive EON information even
when it is not in tuner mode. If such information is
found the receiver will automatically switch into
tuner mode to pick up the EON broadcast. When the
program ends the receiver will return to the original
mode.
42
En
RECEIVER SOURCE
SIGNAL SELECT
SLEEP
DVD TV / SAT FRONT
DIMMER
DVR/ VCR FM / AM
SOUND
AUTO
SURROUND ADVANCED MODE
ROOM
SETUP TEST TONE CH_SELECT
SETUP
ENTER
MUTE
MASTER
VOLUME
TOP MENU DISPLAY T.EDIT MENU
TUNE
P MENU
ST ST
ENTER 2
AUDIO SUBTITLE
TUNE
EON RF ATT
P GUIDE
EXIT
A
SEARCH CLASS MPX D.ACCESS
E C D E
button to put the receiver
button to select the EON
EON NEWS
OFF
• The EON mode is canceled if you switch to AM
reception while setting EON. Start once again after
you return to FM reception.
• Simultaneous requests for Traffic Information (TA)
and News programs is not possible.
• When EON is turned on and a function other than
the tuner is selected, the function will switch to the
FM station automatically when Traffic Information or
News begins. When the program ends, the original
function will be restored.
• You cannot operate the T.EDIT and SEARCH buttons
while the EON indicator in the display lights.
• Functions cannot be changed while the EON
indicator in the display blinks (while receiving EON
broadcast). If you want to change to a source other
than tuner, press the EON button and turn the EON
reception off.
• When EON has been set the EON indicator lights.
During reception of news or traffic information
broadcast the EON indicator blinks.