The following table describes the parameters of this page:
Field
System Time
NTP Configuration
State
Server
Server2
Time Zone
3.8 Diagnostic
In the navigation bar, click Diagnostic. The Diagnostic page that is displayed contains
Ping, ATM Loopback, ADSL and Diagnostic Test.
3.8.1 Ping
Choose Diagnostic > Ping. The page shown in the following figure appears.
The following table describes the parameter and button of this page:
Field
Host
PING
Description
Set the system time manually.
Select enable or disable NTP function. You need to enable
NTP if you want to configure the parameters of NTP.
Set the primary NTP server manually.
Set the secondary NTP server manually.
Choose the time zone in which area you are from the drop
down list.
Description
Enter the valid IP address or domain name.
Click it to start to Ping.
72