Using Your Remote - Targus Multimedia Presentation Remote User Manual

Targus Multimedia Presentation Remote
NOTE: THE SPARE BATTERY COMPARTMENT PROVIDES CONVENIENT STORAGE
FOR A SEPARATE BATTERY (INCLUDED) WHICH CAN BE USED FOR EMERGENCY
POWER.
Remove the mini USB receiver stored inside the center compartment.
Slide the battery cover back into position until it "clicks" firmly into place.
8
Targus Multimedia Presentation Remote

Using Your Remote

Before using the remote, please select your computer type and preferred
presentation software. Locate the switch inside the battery compartment
as shown.
PC PowerPoint ®
Mac KeyNote ®
Mac PowerPoint ®
NOTE: SELECT "PC POWERPOINT" IF YOU USE A COMPUTER MADE BY:
HP/COMPAQ, DELL, TOSHIBA, GATEWAY, PANASONIC, FUJITSU, SONY,
IBM/LENOVO, ACER, ASUS, ETC.
This remote is a plug and play device. It will automatically operate when
the USB receiver is connected to the computer. Plug the mini USB
receiver into any available USB port on your computer.
9