Advertisement
Quick Links
Warranty Statement
ThunderForm Loaded Enclosures purchased in the United States from an authorized MTX dealer
are guaranteed against defects in material and workmanship for a period of two years from the date
purchased by the end user, and limited to the original retail purchaser of the product.
Amplified ThunderForm Enclosures purchased in the United States from an authorized MTX dealer
are guaranteed against defects in material and workmanship for a period of one year from the date
purchased by the end user, and limited to the original retail purchaser of the product.
Product found to be defective during that period will be repaired or replaced by MTX at no
charge. This warranty is void if it is determined that unauthorized parties have attempted repairs
or alterations of any nature. Warranty does not extend to cosmetics or finish. Before presuming
a defect is present in the product, be certain that all related equipment and wiring is functioning
properly. MTX disclaims any liability for other incurred damages resulting from product defects. Any
expenses incurred in the removal and reinstallation of products are not covered by this warranty.
MTX's total liability will not exceed the purchase price of the product. If a defect is present, your
authorized MTX dealer may be able to effect repairs.
Proof of purchase is required when requesting service, so please retain your sales receipt and take
a moment to register your warranty online at www.mtx.com.
One Mitek Plaza, Winslow, IL. 61089
1-800-225-5689 www.mtx.com
Vehicle Specific Subwoofer Enclosure
21A7033
FORD RANGER
And Mazda B Series
Made in the USA
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for MTX ThunderForm FORD RANGER
Summary of Contents for MTX ThunderForm FORD RANGER
- Page 1 MTX disclaims any liability for other incurred damages resulting from product defects. Any expenses incurred in the removal and reinstallation of products are not covered by this warranty. MTX's total liability will not exceed the purchase price of the product. If a defect is present, your FORD RANGER authorized MTX dealer may be able to effect repairs.
- Page 2 7/32” Socket Mounting Brackets INSTALLATION: Follow the steps below For technical assistance call 1-800-CALL MTX. 1. Remove rubber mat from bottom of tray behind driver seat by pulling These instructions are guidelines only and in no way are intended to up on tab.
- Page 3 16. Plug power wire harness into amplifier pre-amp. GAIN POWER STATUS REMOTE CROSSOVER Mounting Brackets LINE LEVEL HIGH LEVEL INPUTS INPUTS 4. In front of the terminal cup there is a hole left where the factory tray was removed this is unseen with the seat in the normal driving position. You can repair this spot by cutting a small piece of carpet from beneath 17.
- Page 4 INPUTS Brown/Pink (-) INPUTS 12. Remove 15amp fuse from MTX fuse holder and connect ring termi- nal to positive side of battery. By removing 5/16 bolt from factory battery Orange/Red (+) terminal (lift the small tab on the factory battery terminal to allow rotation Although, MTX has made every effort to assure proper wiring colors, MTX and removal of 5/16 bolt).
Need help?
Do you have a question about the ThunderForm FORD RANGER and is the answer not in the manual?
Questions and answers