Storing Driving Positions; Storing A Position; Recalling A Stored Position; Rear Head Restraints - CITROËN C5 Owner's Handbook Manual

Storing driving positions

System which stores the settings of
the driver's seat. Up to two positions
can be stored using the buttons on
the side of the driver's seat.
When storing a driving position, the
air conditioning settings are also
memorised.
To adjust the air conditioning, refer
to the "Air conditioning" section.
C O M F O R T

Storing a position

Using buttons M / 1 / 2
Switch on the ignition.
Adjust your seat.
Press button M , then press but-
ton 1 or 2 within four seconds.
An audible signal confi rms that
the settings have been stored.
Storing a new position cancels the
previous position.
For your safety, avoid storing a
driving position while driving.

Recalling a stored position

Ignition on or engine running
Briefl y press button 1 or 2 to re-
call the corresponding position.
An audible signal indicates the end
of the adjustment.
When the ignition is on, after a few
consecutive position recalls,
function will be deactivated until the
engine is started, to prevent dis-
charging of the battery.

REAR HEAD RESTRAINTS

The rear head restraints can be re-
moved and have two positions:
- high, position for use,
- low, storage position.
To raise a head restraint, pull it up-
wards.
To lower it, press the lug then the
head restraint.
To remove it, place it in the high
position, push the lug and pull it up-
wards.
To refi t it, engage the head restraint
rods in the holes taking care to re-
main in line with the seat back.
the
Never drive with the head restraints
removed, they must be in place
and correctly adjusted.
III
63