Storing Driving Positions - CITROËN DS5 Owner's Handbook Manual

Storing driving positions

System which stores the electrical settings
of the driver's seat and the head-up display
settings. It enables you to store up to
two positions using the buttons on the side
of the driver's seat.
Storing a position using
buttons M / 1 / 2
 Switch on the ignition.
 Adjust your seat and the head-up display.
 Press button M , then press button 1 or 2
within four seconds.
An audible signal indicates that the position
has been stored.
Storing a new position cancels the previous
position.
Recalling a stored position
 Briefly press button 1 or 2 to recall the
corresponding position.
An audible signal indicates the end of the
adjustment.
You can interrupt the current movement
by pressing button M , 1 or 2 or by using
one of the seat controls.
A stored position cannot be recalled
while driving.
Recalling stored positions is
deactivated 45 seconds after switching
off the ignition.