Panasonic DP-130 Series Setup Procedure page 4

Setup Procedure
Release Scanner/Remove shipping materials
Do not plug the copier until directed to do so.
1
2
3
4
5
Do not plug in copier until set-up is complete.
C
ATTENTION
Bottom view
4
Remove the fixing screw for the
optics unit.
Pull paper tray out of copier and
secure the screw to the bottom of
the paper tray.
Note: When moving the copier reinstall
the fixing screw.
# Completely remove the paper
tray from the copier.
$ Release the shipping tapes
(2 pieces) from the bottom.
% Push the bottom plate lock
button.
Remove the shipping tapes from
the bottom plate. (2 pieces)
# Remove the shipping tape.
$ Open the sheet bypass.
% Push the button.
& Open the right cover.